BRUSH CUTTER EXCELION 2 DH
53_153238-A
-
5.6.1.1. TAP CUT 2 AND 3 CUTTING HEADS
• They are ideal for mowing and edge trimming.
• They are mainly used in cases where the wear of the
strimmer wire is significant (edge of wall, along fences,
etc.).
Choice of strimmer wire
• For grass: use PELLENC ELECTRIC Ø 2.4 mm strim-
mer wire (reference 159893).
• For dense grass and brush: use PELLENC ELECTRIC
strimmer wire Ø 2.7 mm (reference 159892).
-
5.6.1.2. WEED CONTROL BLADES AND MULCHING BLADES
These accessories have been specially designed for mowing/strimming brush, tall grass, woody vegetation and
even shrubs.
Your tool is compatible with several special "large brush clearing" accessories.
Choice of accessory
A. For dense grass and brush: use a Ø 320 mm twin-
blade (reference 158490) or a Ø 320 mm tri-blade
(reference 158489).
B. To cut and slash woody vegetation, dense brush or
thorny vegetation: use a mulching blade (reference
158491) + a mulching kit (reference 57277).
C. For cutting shrubs, shoots or coppices: use the sa-
wing kit (reference 57275 with the chisel-tooth saw
blade (reference 111700)).
-
5.6.1.3. CITY CUT HEAD
This cutting head can be used in green spaces as well
as in the vicinity of homes. It was designed to limit pro-
jections and can therefore be used safely in urban areas.
59
To Next Page
Loading...
