pellenc EXCELION 2 DH - Technical Data and Emissions

BRUSH CUTTER EXCELION 2 DH
53_153238-A
3.2. TECHNICAL FEATURES
3.2.1. TOOL FEATURES
EXCELION 2
Template DH
Power 1500 W
Tool voltage 43.2V
Weight (excluding cutting tool and safety guard) 5.5 kg
Dimensions (l x w x h) 1800 x 450 x 650 mm
Rotational speeds 1880 to 6600 rpm
Battery compatibility
See Section 3.2.2, « Chargers
and batteries compatibility »
Battery life According to use and battery type
3.2.2. CHARGERS AND BATTERIES COMPATIBILITY
Battery Charger Remarks
ALPHA 520 CB5022 ; CB5022HV *with adapter cord ref. 57248
ULIB 750 CB5022; CB5022HV *with adapter cord ref. 57238
3.2.3. VIBRATION AND NOISE EMISSION VALUES
The determination of noise levels and vibration rates is based on operating conditions at maximum rated speed
according to a standardised test method. It can be used to compare two machines.
Sound pressure values
Maximum sound pressure level at the user's position (Uncertainty K
pA
: 1.5 dB
(A))
L
pA
= 80 dB(A)
Peak sound pressure level at the user's position L
pC
< 130 dB(C)
Sound power values
Measured sound power level L
WA
(uncertainty K
WA
: 2 dB(A)) 94 dB(A)
Guaranteed sound power level L
WAg
96 dB(A)
The measured sound power level and the guaranteed sound power level were measured on a brush cutter with
a metal twin-blade tool.
The measured sound level and the guaranteed sound power level were measured according to a procedure in
accordance with Directive 2000/14 / EC Annex V.
16