Penn A5 Series User Manual

52
This screen is the BUZZER setup start screen. To go to the
BUZZER setup screen, press SET.
n/a n/a
To enable or disable the alarm buzzer, select ON or OFF and
press SET.
• ON
• OFF
Yes
This screen is the DELAY setup start screen. To go to the
DELAY setup screen, press SET.
n/a n/a
To set the delay time, select the delay value from the range
0 minutes to 99 minutes and press SET.
0 minutes to
99 minutes
0 minutes
This screen is the AUTO CLEAR setup start screen. To go to
the AUTO CLEAR setup screen, press SET.
n/a n/a
To enable or disable AUTO CLEAR, select YES or NO and
press SET.
• YES
• NO
No
This screen is the REALARM INTERVAL setup start screen. To
go to the REALARM INTERVAL setup screen, press SET.
n/a n/a
To set the realarm interval, select the interval value from the
range 0 minutes to 99 minutes and press SET.
0 minutes to
99 minutes
0 minutes
File system setup screens
The FILE start screen is the top-level screen to configure the
controller’s file and data import and exports. To move through
the FILE screens, press the DOWN and UP arrow keys. To go
to the CONFIG FILE EXPORT screen, press
SET.
n/a n/a
This screen is the CONFIG FILE EXPORT setup start screen.
To go to the CONFIG FILE EXPORT setup screen, press SET.
n/a n/a
To confirm a file export, select YES, and press SET. • YES
• NO
n/a
To export a file, insert a USB drive into the controller within 15
seconds. The file export begins automatically.
n/a n/a
Table 15: A5xx Controller screens (Part 14 of 15)
Screen name in
message field
Parameter description, behavior, or user action Value range or
selection list
Default
value or
selection
SET
BUZZER
ON
BUZZER
SET
DELAY
MIN
DELAY
0
SET
AUTO CLEAR
YES
AUTO CLEAR
SET
REALARM
INTERVAL
MIN
REALARM
INTERVAL
0
SET
FILE
SET
CONFIG FILE
EXPORT
YES
CONFIG FILE
EXPORT
INSERT USB
DRIVE

Penn A5 Series Specifications

General

Brand	Penn
Model	A5 Series
Category	Controller
Language	English