EasyManua.ls Logo

Pentair EASYTOUCH PL4 - Glossary

Pentair EASYTOUCH PL4
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EASYTOUCH
®
PL4/PSL4 Control System Installation Guide
EASYTOUCH
®
PL4/PSL4 Control System Installation
37
Glossary
ControlPanel: The EasyTouch
®
PL4/PSL4ControlSystemOutdoorControlPanelwithexible
hinge. Installed in upper portion of EasyTouch PL4/PSL4 control system Power Center.
FeatureCircuits: Programmable circuits that may control relays and/or valve actuators. For details,
seetheEasyTouchPL4/PSL4ControlSystemSystemsUser’sGuide(P/N522461)
HighVoltagePanel/Compartment:Removable panel for the high voltage compartment of
EasyTouchPL4/PSL4PowerCenter.Thehighvoltagewiringincluding18Vand24Vcircuit
breakers, relays and GFCI.
IndoorControlPanel:This wall mounted remote controller with LCD (liquid crystal display) is wired
to the control circuit board in the EasyTouch PL4/PSL4 control system Power Center. The control
panel can be wall mounted inside a house to control the EasyTouch PL4/PSL4 control system.
IntelliChlor
®
(SCG): Salt Chlorinator Generator. Uses a process called electrolysis to produce
sodiumhypochlorite(liquidchlorine)fromalowconcentrationofsaltaddedtothepoolwater.Model
IC 20 Cell (P/N 520554) for pools up to 20,000 U.S. gallons (75 liters) and model IC 40 Cell (P/N
520555) for pools up to 40,000 U.S. gallons (151 liters). The external IntelliChlor Power Center (P/N
520556).
iS4WirelessController: Four function spa-side remote. Spa wall or deck mounted.
OutdoorControlPanel:ControlpanelwithexiblehingeinstalledinupperportionofPowerCenter
to control EasyTouch PL4/PSL4 control system.
Power Center:Metalenclosurewithpowerrelays,transformer,and18Vand24Vinternalcircuit
breakers. Used for distributing power for controlling EasyTouch PL4/PSL4 control system.
LowVoltageCompartment: Top compartment of Power Center for all low voltage wiring.
LowVoltageRaceway: Vertical space in the left side of Power Center for low voltage cabling.
MainCircuitBoard: The circuit board mounted behind the EasyTouch PL4/PSL4 control system
control panel.
RelayCircuits: The circuits that control the relays on the circuit board. Connectors on top edge of
the circuit board.
ScrewTerminalConnector: Removable connector that may attach to circuit board with multiple
sockets (anywhere from 2 to 6) to receive conductors from controllers and sensors; conductors held
by screw terminals; multiple conductors of a small enough gauge (usually 22 AWG) may be coupled
to a single socket of a terminal connector.

Table of Contents

Other manuals for Pentair EASYTOUCH PL4

Related product manuals