Installer Manual Fleck 3150 - NXT - Maintenance
Ref. MKT-IM-010 / B - 28.05.2018 81 / 122
9.2.2. Motor replacement
No. Operation
A Using a flat screwdriver, unscrew (1) and open the cover (2).
B Disconnect the motor (10).
C
Remove the micro-switches (9), see 9.2.3. Power head, piston and/or seal and spacer kit
disassembly/replacement, page 82.
D Using a Philips screwdriver, unscrew (5) and open the controller (8).
E Using a pliers, remove the connecting pin (3) and the circlip (6).
F Remove the pin (4) and the plate (7).
G Using a pliers, remove the circlip (14) and the wheel (13).
H Using a flat screwdriver unscrew (12).
I Using a wrench, unscrew (11) and remove the motor (10).
J Reverse above procedure steps to rebuild
To Next Page
Loading...
