Pentair IntelliPool - Connection of the Power Command of the PAC; Connection of the Lighting to the Control Center; Connection of the Heating Pump to the Control Center; Total Power of Lighting Is Lower than 1,600 W

14
12 V
230 V
230 V
230 V
N L
AUX1
CL
230 V ~
BUS
24V RS-485
pH
5-230 V~
OR
N L
AUX1
CL
230 V ~
BUS
24V RS-485
pH
5-230 V~
OR
N L
AUX1
CL
230 V ~
BUS
24V RS-485
pH
5-230 V~
OR
< 1600 W
12 V
A1 A2
> 1600 W
A1 A2
Connection of the power command of the PAC
Connection of the heating pump to the Control Center
1 - Connect the lighting in accordance with the power as described below
Connection of the lighting to the Control Center
Total power of lighting is lower than 1,600 W
Total power of lighting exceeds 1,600 W
1 - Connect the heating pump as described below or by wiring the flow switch in series.
Ensure that the heating pump is equipped with protection against overheating!
EARTH
NEUTRAL (N)
PHASE (L)
EARTH
NEUTRAL (N)
PHASE (L)
EARTH
NEUTRAL (N)
PHASE (L)
Cabling via the safety shutdown
(flow switch)