Pentair IntelliPool User Manual

25
Set points: 45000
Pool information
Synchronise time
Save modifications
m
3
Volume:
28
Heating
°CSetpoint value:
24
AUX 1: BackWash
Function choice:
backwash
pH regulation
Assignment feature:
7.3
pH corrector type:
pH-
s
L/d
°C
Injection time:
20
Maximum volume:
0.3
Threshold:
0.3
RedOx sterilisation
Filtration
Setpoint value:
Disinfectant type:
Daily timer programming
Authorisation for pump to function in automatic mode
Chlorinator
mV
700
Threshold:
°C
15
0 h 1h 2h 3h 4h 5h 6 h 7h 8h 9 h 10h 11h 12 h 13h 14h 15 h 16h 17h 18 h 19h 20h 21h 22h 23h 24 h
Start time:
7h
End time:
Auto
Heating priority:
Frost protection linked to the air T°:
ORP priority:pH priority:
Lighting
Daily timer programming
0 h 1h 2h 3h 4h 5h 6 h 7h 8h 9 h 10h 11h 12 h 13h 14h 15 h 16h 17h 18 h 19h 20h 21h 22h 23h 24 h
Choice of the colour:
Caribbean Mode
°CFrost protection:
3
%Economy mode:
30
%Turbo mode:
30
Wash time:
1m 30s
Filter rinse time:
30 sec
hFiltration duration before alert:
260
Prevents the operation of the lighting with the roller shutter:
0°C 5°C 10°C 15°C 20°C 25°C 30°C 35°C
x1
x2
x3
This menu makes it possible to fix all the set points of the connected equipment.
Some parameters can only be accessed according to the type of account
The display depends on the type of equipment connected and the options selected
Set point menu
Set the Control Center to the time of the
computer
These schedule settings are only used if
the filtration is set to schedule mode in the
menu Commands.
These schedule settings are only used if
the lighting is set to schedule mode in the
menu Commands.
It may take up to 15 minutes for the
application of any modification made on the
internet to be seen on the installation.
The disinfectant is selected directly at the
Control Center.
Heating pump value to be achieved in AUTO
mode in the menu Commands.
RedOx value to be achieved in AUTO mode in
the menu Commands.
Anti-freezing value.
This setting makes it possible to limit the time
window of filtration to ensure that it does not
function at inappropriate times (noise problems
at night in terms of neighbours, for example).
A priority makes it possible to control filtration
within the authorised time window (because this
equipment needs to function when the filtration
is in operation and within the normal time
period, this equipment is not authorised to
control filtration).
pH value to be achieved in AUTO mode in the
menu Commands
- The selection between pH- and pH+ is directly
accessible at the Control Center.
- This selection is not accessible from a private
account.
English
: cannot be accessed from a private account Individual l
Water temperature
Optimal pump speed
Pool volume renewal rate

Pentair IntelliPool Specifications

General

Brand	Pentair
Model	IntelliPool
Category	Lighting Equipment
Language	English