Pentair IntelliPool User Manual

17
VALID
ESC
INTELLIPOOL
®
CONTROL
VALID
ESC
INTELLIPOOL
®
CONTROL
VALID
ESC
INTELLIPOOL
®
CONTROL
3 s
English
The settings of the rotation speeds of the IntelliFlo can be
accessed via the IntelliFlo menu at www.intellipool.eu
The settings which can only be accessed by the “Install” hidden menu are listed in Bold Italic.
1: In the Settings menu, press simultaneously on ESC & ENTER for 3 seconds. The sub-menu Install menu appears at the bottom right of the screen
(automatically disappears after 120 minutes).
Installation, restricted access to some specific settings
pH/Disinfect./Temp
pH
Auto/Off
pH+/pH- define
Setpoint
Priming
Disinfectant
Auto/Off
Setpoint
Priming
Temperature
Auto/Off
Setpoint
Units (language and °F/°C selection)
Time
Radio
Register equipment
Register remote control
Reset remote control
Menu Lighting
Manual / Program / Off
Colour: 0
Schedule settings
Filtration menu
Auto /On / Off / Program
Shock
Filtration setting
Cleaning
Filtration operation time slot
Menu Aux1 (
invisible if AUX1 is programmed as backwash auto)
Manual / Horloge / Off
Timer: 10’
Program settings
English
SETTINGS MENU
-pH/Disinfect./Temp
-Language -Time
-Radio -Instal
SETTINGS MENU
-pH/Disinfect./Temp
-Language -Time
-Radio
07/12/2013 15:23:48
Water temp.: +24.0°C ¥
pH:7.3 ORP:629mV
Cond: 56uS 3.51g/L
Electrolyser/Other
Filtration
Anti-freezing: + 3 °C
Eco= (Standard -30%)
Turbo= (Standard +30%)
pH
Injection time: 15 sec
Temperature min.: 16 °C
Daily volume, max.: 0.2 L
Disinfect.
Injection time: 15 sec
Temperature min.: 14 °C
Volume days Max: 0.5 L
Aux1
Robot mode: No
Backwash mode: YES
Backwash duration: 10 sec
Default values
Install menu
Menu Settings

Pentair IntelliPool Specifications

General

Brand	Pentair
Model	IntelliPool
Category	Lighting Equipment
Language	English