101
Shooting Functions
4
• Turn the rear e-dial (S) while pressing the m button to change the EV
compensation value. (p.115)
• Set the shutter speed in increments of 1/3 EV or 1/2 EV. Set the exposure
steps in [1. EV Steps] in the [A Custom Setting 1] menu. (p.116)
• The proper exposure may not be obtained with the selected shutter speed
when the sensitivity is set to other than [AUTO] (
p.90
).
Exposure Warning
If the subject is too bright or too dark,
the aperture value will blink on the
status screen and LCD panel and in the
viewfinder. If the subject is too bright,
choose a faster shutter speed. If it is too dark, choose a slower shutter
speed. When the aperture value indication stops blinking, you can
take the picture with proper exposure.
Use a commercially available ND (Neutral Density) filter if the subject
is too bright. Use a flash if it is too dark.
e-dial in b mode
You can set the functions of the front and rear e-dials in b mode. Set
in [24. e-dial in Tv mode] in the [A Custom Setting 4] menu (p.86).
Settings Front e-dial (R) Rear e-dial (S)
1 b (Shutter Speed) – (Not Available)
2 b (Shutter Speed) EV Compensation
3 EV Compensation b (Shutter Speed)
4 b (Shutter Speed) Sensitivity
5Sensitivity b (Shutter Speed)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
