Pentax K-7 - Shooting with the Mirror Lock-Up Function

141
Shooting Functions
4
Use the Mirror Lock-up function if camera shake is evident even when the
remote control or cable switch is used with a tripod.
To use the Mirror Lock-up function, press the shutter release button to
raise the mirror up. Press it again to release the shutter.
This camera has the following two types of the mirror lock-up shooting.
1 Mount the camera onto a tripod.
2 Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
3 Use the four-way controller (45) to select d.
4 Press the four-way controller (3)
and use the four-way controller
(45) to select d or e.
d appears on the LCD panel.
Shooting with the Mirror Lock-up Function
d Mirror lock-up Mirror lock-up shooting with the shutter release button.
e
Mirror lock-up
remote control
Mirror lock-up shooting with the remote control. The
shutter will be released immediately after the shutter
release button on the remote control unit is pressed.
(p.138)
Drive Mode
Mirror Lock-up Shooting
Cancel
MENU
MUP
MUP
OK
OK