250
Processing Images
8
Specify the parameters for developing RAW images.
The following parameters can be changed.
*1 This cannot be set when [File Format] is set to [TIFF]. (The setting is fixed to W.)
*2 This cannot be set for RAW files taken in Multi-exposure mode.
*3 This can be selected only when a compatible lens is attached. (p.201)
1
Press the four-way controller
(23) in Step 4 on p.247 to
choose the parameter you want
to change.
Specifying the Parameters
Parameter Value Page
File Format JPEG/TIFF –
Recorded Pixels
*1
W (4672×3104)/J (3936×2624)/
P (3072×2048)/i (1728×1152)
p.186
Quality Level
*1
Z (Premium) / C (Best) / D
(Better) / E (Good)
p.187
Custom Image
Bright/Natural/Portrait/Landscape/Vibrant/
Muted/Monochrome
p.205
White Balance
*2
F (Auto), G (Daylight), H (Shade),
^ (Cloudy), JD (Fluorescent Light Daylight
Color), JN (Fluorescent Light Daylight
White), JW (Fluorescent Light Cool White),
JL (Fluorescent Light Warm White),
I (Tungsten Light), L (Flash), f,
K (Manual), K (Color Temperature)
p.191
Sensitivity -2.0 to +2.0 –
High-ISO Noise
Reduction
Off/Low/Medium/High p.92
Shadow Correction Off/Low/Medium/High p.199
Distortion Correction
*3
Off/On p.201
Lat-Chromatic-Ab Adj
*3
Off/On p.201
Color Space sRGB/AdobeRGB p.279
MENU
File Format
14
M
sRGB
RAW
JPEG
OK
100-0001
To Next Page
Loading...
