144
Shooting Functions
4
4
Press the 4 button.
The camera is ready to take pictures continuously.
5
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when focused.
6
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully
pressed. Take your finger off the shutter release button to stop.
During interval shooting, pictures are taken at a set interval from a set time.
1
Select [Interval Shooting] in the [A Rec. Mode 2] menu
and press the four-way controller (5).
The [Interval Shooting] screen appears.
• If the focus mode is set to l (Single mode), the focus position is locked
on the first frame and pictures are taken continuously at the same interval.
• Focusing is continuously active during continuous shooting when the focus
mode is set to k (Continuous mode).
• You can also use the remote control for continuous shooting. (p.138)
• The shutter cannot be released until charging is complete when using the
built-in flash. You can set the camera to enable shutter release while charging
the built-in flash in [30. Release While Charging] in the [A Custom Setting 5]
menu. (p.77)
• Select a mode other than g or h in the [Drive Mode] screen to cancel the
continuous shooting. The setting is canceled when the camera is turned off if
[Drive Mode] in [Memory] (p.281) of the [A Rec. Mode 4] menu is set to P
(Off).
• The shooting speed may be slower when [Lens Correction] (p.201) is set to
O (On).
Interval Shooting
Interval shooting is not available when the mode dial is set to A, B (Green),
p (Bulb) or C (Movie), or when Extended Bracketing, Digital Filter or HDR
Capture is set.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
