152
Shooting Functions
4
6
Use the four-way controller (23) to select the bracketing
amount.
For [White Balance], select from [BA±1] (default setting), [BA±2], [BA±3],
[GM±1], [GM±2] or [GM±3].
For other settings, select from [±1] (default setting), [±2], [±3] or [±4].
7
Press the 4 button.
8
Press the 3 button twice.
The camera returns to the Capture mode.
9
Take the picture.
Three frames are saved.
• When Extended Bracketing is set, the file format is always set to [JPEG] and
cannot be changed. You cannot use Extended Bracketing when the file
format is set to [RAW].
• When Extended Bracketing is set, Interval Shooting and Multi-exposure are
not available.
• Extended Bracketing, Digital Filter and HDR Capture cannot be used at the
same time. The mode set last is used.
• Exposure Bracketing and Extended Bracketing can be used at the same
time.
• When [Image Tone] for Custom Image is set to [Monochrome], [Saturation]
and [Hue] are not available.
• When [Fine Sharpness] is set for Custom Image, the sharpness of Extended
Bracketing operates as Fine Sharpness.
• When [Contrast] is set for Custom Image, the contrast of Extended
Bracketing operates according to the [Contrast] setting.
To Next Page
Loading...
