Pentax K-7 - Using the Control Panel

35
Before Using Your Camera
1
While shooting, the current settings can be checked on the status screen.
You can also switch the display to the control panel and change settings.
Following, how to set the JPEG quality will be explained as an example.
1 Check the status screen and then
press the M button.
The control panel appears.
Press the M button if the status
screen is not displayed.
2 Use the four-way controller
(2345) to select an item you
want to change the setting for.
You cannot select an item that cannot be
changed.
3 Use the front e-dial (R) or rear
e-dial (S) to change the
setting.
Using the Control Panel
P
SHIFT
AF.S
1/
ISO
AUTO
2000 2.8
±0.0
±0±0
F
11223344+5 - 5
AWB
14M
[
37
]
1600
JPEG
OFF
OFF
14M
[
37
]
05/05/ ’09
ISO AUTO Setting
10:30AM
ISO
AUTO
200-1600
JPEG
HDR
HDR
OFF
OFF
OFF
OFF
WB
DR
DR
200
200
14M
[
37
]
05/05/ ’09 10:30AM
ISO
AUTO
200-1600
JPEG
HDR
HDR
OFF
OFF
OFF
OFF
WB
D
-
R
D
-
R
200
200
JPEG Quality