43
Getting Started
2
Using the Battery
Insert the battery into the camera. Use only a D-LI90 battery.
When using the battery for the first time, or when the battery has not been
used in a long time, or when [Battery depleted] appears, recharge the
battery.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6ft (1.8m)”
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Face the 2 mark on the exclusive battery up and insert it
into the battery charger.
The indicator lamp is lit during charging.
The indicator lamp turns off when the battery is fully charged.
4
When the battery is fully charged, remove the battery from
the battery charger.
Charging the Battery
Lithium-ion battery
Indicator lamp
Battery charger
AC plug cord
To Next Page
Loading...
