Pentax K-7 - Adjusting the Brightness of the Monitor

264
Changing Additional Settings
9
2 Press the four-way controller (5)
and use the four-way controller
(23) to select the display time
for [Instant Review].
3 Press the 4 button.
4 Use the four-way controller (23) to select [Histogram] or
[Bright/Dark Area].
5 Use the four-way controller (45) to select O or P.
6 Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
You can adjust the brightness of the monitor. Adjust settings when the
monitor is hard to see.
1 Select [Brightness Level] in the [R Set-up 2] menu and
press the four-way controller (5).
The [Brightness Level] screen appears.
2 Use the four-way controller (45)
to adjust the brightness.
You can adjust the value from the 15
levels.
3 Press the 4 button.
Adjusting the Brightness of the Monitor
Instant Review
Cancel
MENU
Display Time
Histogram
Bright/Dark Area
OK
OK
1sec.
3sec.
5sec.
Off
Cancel
MENU
Brightness Level
OK
OKOK
±0
±0