122
Shooting Functions
4
5
Press the 4 button.
The adjustment value is saved.
6
Press the 3 button.
The camera returns to the Capture mode.
7
Take a test picture.
You can easily check the focusing position by enlarging the image during
Live View (p.156) or Digital Preview (p.131).
Choose the part of the viewfinder to set focus to. The factory default
setting is S (Auto).
The selected AF point lights red in the viewfinder (Superimpose AF Area).
Set with the AF point switching dial.
• Even when an adjustment value has been saved using [Apply One], if you
press the 4 button with [Apply All] selected in Step 3, the [Apply All] value
is used instead of the [Apply One] value.
• To reset a saved adjustment value, select [Reset] in Step 3.
Selecting the Focusing Area (AF Point)
U Center Sets the focusing area to the center of the viewfinder.
jSelect Sets the focusing area to one of the eleven points in the AF area.
S Auto
The camera selects the optimum AF point even if the subject is
not centered.
• AF point is not displayed in the viewfinder when [Off] is selected for [15.
Superimpose AF Area] in the [A Custom Setting 3] menu (p.86).
• The AF point is fixed to U regardless of this setting when using lenses other
than DA, DA L, D FA, FA J, FA or F lens. (p.292)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
