Pentax K-7 - Page 147

145
Shooting Functions
4
2 Use the four-way controller (23)
to select [Interval].
When taking two or more pictures, set the
wait time until the next picture is taken.
Use the four-way controller (45) to
select the number of hours, minutes, and
seconds, and use the four-way controller
(23) to set the time.
You can set up to 24 hours, 00 minutes,
and 00 seconds.
3 Use the four-way controller (23) to select [Number of
Shots].
Set the number of shots to be taken.
Press the four-way controller (5) and use the four-way controller (23)
to select the number of shots to be taken.
You can select between 1 and 99 shots.
4 Use the four-way controller (23) to select [Start Interval].
Set the time when the first picture is taken.
Press the four-way controller (5) and use the four-way controller (23)
to select [Now] or [Set Time].
5 Use the four-way controller (23) to select [Start
Shooting] and press the 4 button.
The camera is ready to take a series of interval pictures.
6 Press the shutter release button
halfway.
The focus indicator ] appears when the
subject is in focus.
Now Shooting starts immediately. You can take two or more pictures.
Set
Time
Shooting starts at the set time. Press the four-way controller (3) to
select [Start Time], use the four-way controller (45) to select the
time, and use the four-way controller (23) to set the start time.
Interval Shooting
Cancel
MENU
Start Shooting
Interval
Number of Shots
Start Interval
2 images
Now
Start Time
OK
OK
00 00 00
:
'"
Interval Shooting
Exit
MENU
Standby
Remaining Shots 10 images
Interval
00 00 00
:
'
"