169
Using the Flash
5
1
Set the mode dial to e, K or c.
2
Press the E button.
The built-in flash pops up.
3
Press the four-way controller (3).
The [Flash Mode] screen appears.
4
Select G or H and press the 4 button.
The shutter speed is set slower to give the appropriate exposure for the
background.
5
Take the picture.
1
Set the mode dial to b, L or a .
2
Press the four-way controller (3).
The [Flash Mode] screen appears.
3
Select E or F and press the 4 button.
4
Set the shutter speed (for b mode) or shutter speed and
aperture (for L or a mode).
Set so that proper exposure is obtained in 1/180 seconds or slower.
5
Press the E button.
The built-in flash pops up.
6
Take the picture.
Using e/K/c mode
Using b/L/a mode
To Next Page
Loading...
