EasyManua.ls Logo

Pentax K-7 - Page 313

Pentax K-7
336 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
311
Appendix
10
Playback
Function
Single frame, multi-image display, zoom display (up to 32 times,
scrolling possible), image comparison, rotating, calendar display,
folder display, slideshow, histogram, bright/dark area, resize,
cropping, index (Thumbnail/Square/Random1/Random2/Random3/
Bubble)
Exposure
Mode
A, B Green, e Hyper-program, K Sensitivity priority, b
Shutter priority, c Aperture priority, L Shutter & Aperture priority,
a Hyper-manual, p Bulb, M Flash X-sync Speed, C Movie
Shutter
Electronically controlled vertical-run focal-plane shutter, Speed
range (1) Auto 1/8000 to 30 sec. (stepless), (2) Manual 1/8000 to 30
sec. (1/2 EV steps or 1/3 EV steps), Bulb, Electromagnetic release,
Shutter lock by setting main switch in OFF position
Lens Mount
PENTAX K
AF2 bayonet mount (AF coupler, lens information contacts,
K-mount with power contacts)
Lens Used
PENTAX K
AF3 mount lenses, KAF2 mount lenses, KAF mount lenses,
K
A mount lenses
Autofocus
System
TTL phase-matching autofocus system (SAFOX VIII+), AF
operational brightness range: EV -1 to 18 (at ISO 100 with f/1.4 lens),
Focus lock available, Focus Mode: l (Single)/k
(Continuous)/\, Adjustable AF point
Viewfinder
Pentaprism Finder, Interchangeable Natural-Bright-Matte III focusing
screen, Field of view: approx. 100%, Magnification: approx. 0.92×
(with 50 mm f/1.4 lens at ), Diopter: approx. -2.5m
-1
to +1.5m
-1
(per meter)
Viewfinder
Indication
Focus information: ] is lit when in-focus and blinking when unable
to focus, b is lit = Built-in flash ready, b is blinking = Flash should
be used or incompatible lens is being used, Shutter speed, Confirm
Sensitivity, Aperture value, e-dial enabled indicator, @ = AE lock,
Remaining capacity, m = EV compensation/Exposure Bracketing,
N = Flash exposure compensation, \ = Manual focus,
k = Shake Reduction display, V = Multi-exposure,
M = Metering method, V = Change AF point, EV bar, Electronic
Level, RAW/RAW+
LCD Panel
Display
b is lit = Built-in flash ready, b is blinking = Flash should be used or
incompatible lens is being used, 3 = Auto flash discharge,
>=Red-eye reduction, Q = Slow-speed sync, E = Trailing
Curtain Sync, 9 = Single frame shooting, j = Continuous shooting,
g =Self-timer, W = Remote control shooting, ? =Battery
exhaustion warning, N = Flash exposure compensation, Confirm
sensitivity, Shutter speed, Aperture value, Remaining capacity,
m = EV compensation, Pc-S (mass storage)/Pc-P (PTP) appears
when the USB cable is connected, EV bar, Electronic Level, 1,
1P
Preview
Function
Live View: TTL method using the image sensor, Zoom Display
and Show Grid are usable
Optical Preview: Depth of field confirmation (electronically controlled
and usable in all exposure modes)
Digital Preview: Composition, exposure, focus and white balance
confirmation

Table of Contents

Other manuals for Pentax K-7

Related product manuals