Pentax K-7 - Page 93

91
Shooting Functions
4
1 Select [ISO AUTO Setting] in the [A Rec. Mode 1] menu
and press the four-way controller (5).
The [ISO AUTO Setting] screen appears.
2 Press the four-way controller (5)
and use the four-way controller
(23) to set the minimum
sensitivity.
3 Press the four-way controller (5)
and use the four-way controller
(23) to set the maximum
sensitivity.
4 Press the 4 button.
5 Use the four-way controller (23) to select [AUTO ISO
Parameters].
6 Use the four-way controller (45)
to select the parameter.
u: Increases the sensitivity as little
as possible
s: Standard (Default setting)
a: Actively increases the sensitivity
7 Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
When [Highlight Correction] is set to O (On) in [D-Range Setting] in the
[A Rec. Mode 1] menu (p.199), the minimum sensitivity is ISO 200.
ISO AUTO Setting
ISO AUTO 100 800-
AUTO ISO Parameters
MENU
ISO AUTO Setting
AUTO ISO Parameters
Cancel
MENU
ISO AUTO
OK
OK
100 800-
ISO AUTO Setting
AUTO ISO Parameters
MENU
ISO AUTO 100 800-