ATTACHING THE LENS
14
1. Remove the body mount cap q and rear
lens cap w as shown in the illustration.
• The body mount cap is designed to protect the
camera against scratches and dust at the facto-
ry. For storage, the optional accessory “Body
Mount Cap K” is available.
2. Align the red dots on the camera and lens
mount, attach the lens to the camera body,
and turn it fully to the right until you hear a
click.
• Ensure that the camera’s main switch is in the
[OFF] position before attaching an FA zoom lens
to prevent unexpected operation of the lens.
BASIC OPERATION (PREPARATION)
To Next Page
Loading...
