USING SMART FLASH MODE
Auto-popup flash function
1. Depress the flash mode button until [ ]
appears on the LCD panel.
1. low light situation
2. backlit situation
2. The built-in flash automatically pops up
when depressing the shutter release button
halfway down in the following conditions.
The auto-popup flash function operates only
When the Auto Picture Modes or Picture Mode is
set.
• The Built-in flash does not retract automatically.
• The built-in flash does not discharge when not
required even though it has been in the up posi-
tion.
• See page 32 for more details.
• ( ) cannot be cancelled with the Auto Picture
Mode set.
25
BASIC OPERATION (SHOOTING)
To Next Page
Loading...
