ACCESSORIES (OPTIONAL)
A number of dedicated accessories are available
for this camera.
• Cable Switch F
A shutter release cord designed for use with the MZ-
7/ZX-7, Z-10/PZ-10, ZX-50/MZ-50, MZ-5N/ZX-5N, Z1-
P/PZ-1P.
• Magnifier FB
A viewfinder accessory for magnifying the central area
of the viewfinder.
• AF500FTZ
A TTL Auto Zoom flash with a built-in AF spotbeam and
large guide number of 50 in meters (ISO 100). It fea-
tures the slave sync flash function, multiple flash burst,
contrast-control-sync flash, leading/trailing-curtain-
sync flash mode.
• AF330FTZ
A TTL Auto Zoom flash with a built-in AF spotbeam and
guide number of 33 in meters (ISO 100). It features the
contrast-control sync flash, leading/trailing-curtain-
sync flash mode.
• AF220T
A TTL Auto Zoom flash with a guide number of 22 in
meters (ISO 100).
• Macro Flash AF140C
A TTL macro flash unit with the guide numbers 14 in
meters (ISO 100).
• AF Adapter 1.7X
An adapter for autofocus photography using a non-aut-
ofocus lens with a maximum aperture of f/2.8 or larger.
• Refconverter A
Right angle finder which attaches to the grooves on
both sides of the viewfinder. The viewfinder magnifica-
tion is able to switch from 1X to 2X.
• AA-Battery Pack F
G
The battery pack which takes four AA batteries can
attach at the bottom of the camera, instead of using the
lithium batteries.
• Data Back Fl
Allowing you to print one of the following modes on the
film both standard format mode and panorama format
mode.
Year / month / day, day / month / year, month / day / year,
day / hour / minute, --------- (blank)
Notes on accessories
• “Auto Bellows A” cannot be used in combination with
the double cable release. Use “Cable switch F” instead.
When taking a vertical photograph, position the camera
with the grip facing upward. In this case, however, the
cable switch F cannot be used, so shooting in a verti-
cal position is not recommended.
• When attaching the “ADAPTER K FOR 645 LENS” to
the camera body, the camera shift lock screw of the
lens may hit the camera body. To avoid this, change the
position of the fixing screw.
• When the refconverter A is used, it may interfere with
the camera when you open or close the back cover.
Remove the refconverter A before opening or closing
the back cover.
79
ADVANCED OPERATIONS
To Next Page
Loading...
Need help?
General
