22
3. Open the back cover and remove the film.
• A roll of 24-exposure film takes about 13 sec-
onds to rewind.
• Before opening the back cover, check that [ ] is
blinking.
• The shutter may be released a frame or more
after the specified number of frames have been
used as indicated by the number of frames on
the film cartridge. However, those extra frames
may be lost in processing. When you take impor-
tant pictures, rewind the film when the film reach-
es the number of frames indicated on the film
cartridge.
* Rewinding a film in mid-roll
If you wish to unload the film before exposing all
the frames, use this function.
Set the main switch to the ON position, and
then depress the mid-roll rewind button by
using the protruding part of the strap clamp.
• Do not depress the button with an object having
a sharp tip.
• Before opening the back cover, check that [ ] is
blinking.
BASIC OPERATION (PREPARATION)
To Next Page
Loading...
