3. Aim the remote control transmitter towards
the remote control receiver on the camera,
and then depress the shutter release button
on the remote control.
• The operating distance of the wireless remote
control is 5m from in front of the camera.
4. The self-timer lamp blinks rapidly for 3 sec-
onds and then the shutter is released.
• When the self-timer lamp blinks rapidly, the audi-
ble PCV signal is heard.
• When the picture is taken, the self-timer lamp
lights for approx. 2 seconds.
• The PVC signal can be canceled.
• The remote control may not work in a backlight
situation.
• To cancel the self-timer at any time after it’s been
activated, set the main switch to the OFF posi-
tion or depress the drive button to set any other
mode.
41
ADVANCED OPERATIONS
To Next Page
Loading...
