* When the shutter release button is depressed
halfway down, the shutter speed and aperture
value will be displayed in the viewfinder and on
the LCD panel. The bar underneath the shutter
speed indicates that you can change the shutter
speed.
* Exposure Warning
If the subject is too bright or too dark, the shutter
speed and aperture setting in the viewfinder blink.
When the subject is too bright, choose a faster
shutter speed. If it is too dark, choose a slower
shutter speed. When the shutter speed indication
stops blinking, you can take the picture. If both
selected shutter speed and aperture blink, it
means that the exposure is out of metering range,
unable to obtain a correct exposure even if the
shutter speed is adjusted. Select a darker subject
if the subject is too bright. Use a flash if it is too
dark.
57
ADVANCED OPERATIONS
To Next Page
Loading...
