OTHERS
85
Electronically-controlled type with delay time of 12 sec. Start by depressing of shutter release but-
ton, Operation confirmation: By PCV beep tone. Cancelable after operation
Instant-return mirror with AF secondary mirror
Film advances automatically to 1st frame after back cover is closed, Film information window is
provided
Auto wind/rewind by built-in motor, Consecutive or Single advance mode, Approx.2
frames/sec.(consecutive mode), Auto rewinding starts at end of roll, Film rewind/completion of
rewinding is displayed on the LCD panel, Mid-roll rewind button will rewind film in mid-roll
TTL multi(6)-segment metering, Metering range from EV-1 to EV21 at ISO100 with 50mm f/1.4 lens
± 3EV in 0.5EV step increments
Series-control, Auto-popup TTL Auto Flash (RTF), Guide number:11 (ISO100/m), Illumination
angle covers 28mm lens angle of view, Flash-sync-shutter in the range from 1/100 sec. to a slow-
er speed, Day-light-sync flash, Slow-shutter-sync flash, Contrast-control-sync flash (ISO range =
25 ñ 800), Automatic flash function, Red-eye reduction flash function
Hot shoe with X-contact with couples with Pentax dedicated auto flashes, ISO range = 25-800,
Red-eye reduction flash function
Two 3V lithium batteries (CR2 or equivalent)
Battery exhaustion symbol [ ] is lit (blinking when the shutter is locked; no indication on the
right-hand edge of the viewfinder.)
135.5mm(W)x92.0mm(H)x63.5mm(D) (5.3´x3.6´x2.5´) 380g (13.4 oz) body only without batteries
135.5mm(W)x92.0mm(H)x63.5mm (5.3´x3.6´x2.5´) 395g (13.9 oz)
Hot Shoe Cover FK, Release Socket Cap F, Camera Strap FK, Eye Cup FK, Finder Cap
Interchangeable for replacing with Data Back FI
Self-timer ––––––––
Mirror: ––––––––––
Film Loading: ––––
Film Wind &
Rewind: ––––––––––
Exposure Meter: ––
Exposure
Compensation: ––––
Flash:––––––––––––
Flash sync: ––––––
Power Source: ––––
Battery Exhaustion
Warning: ––––––––
Dimension and
Weight: ––––––––––
Date Model
Dimension and
weight: ––––––––––
Supplied
Accessories: ––––––
Back cover: ––––––
SPECIFICATIONS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTIFICATION OR ANY OBLIGATION ON
THE PART OF THE MANUFACTURER.
To Next Page
Loading...
