Pentax Optio S1 - Page 93

91
3
Taking Pictures
5 Press the 4 button.
The focus is fixed and the camera returns to capture status.
After the focus is fixed, you can press the four-way controller (5) again
to display the \ indicator and readjust the focus.
You can change the autofocus area (Focusing Area).
1 Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2 Use the four-way controller (23) to select [Focusing
Area].
3 Press the four-way controller (5).
A pull-down menu appears.
4 Use the four-way controller (23)
to change the focusing area
setting.
5 Press the 4 button.
The setting is saved.
The shooting mode and drive mode cannot be changed while the \
indicator is displayed.
To switch from \ to another focus mode, press the four-way controller
(5) while the \ indicator is displayed.
To Set the Focusing Area
J
Multiple Normal autofocus area
K
Spot The autofocus area becomes smaller.
W
Automatic Tracking AF Keeps moving subjects in focus.
Rec. Mode
1/3
MENU
Cancel
OK
OK
EV Compensation
Recorded Pixels
White Balance
AE Metering
Sensitivity
Focusing Area
AWB
0.0