Editing Images and Movies
131
4
Playing Back and Editing Images
You can choose an image saved on the SD Memory Card to be displayed
as the start-up screen when the camera is turned on.
1 In Playback mode, touch the arrow icons (qr) to
choose the image you want to use as the start-up screen.
2 Touch the LCD monitor.
The [Playback Toolbar] appears.
3 Touch the n icon.
• The [Playback Palette] appears.
• If the desired icon does not appear, touch the arrow icons (qr) to
advance the screen.
4 Double-touch the ^ icon.
• The setting screen appears.
• Touch an icon with the guide checkbox
checked to display the guide display.
5 Touch the arrow icons (qr) to
select a new start-up screen.
Select the “Off” screen to not display a start-
up screen.
6 Touch [OK].
The start-up screen setting is saved.
Caution
Once an image has been selected as the start-up screen, it will not be deleted
even if the original image is deleted or the SD Memory Card or built-in memory
is formatted. The custom start-up image is not deleted even if the camera is
returned to its default settings. To delete the image, overwrite it by selecting
any other image for the start-up screen.
Setting an Image for the Start-up Screen
OK
100-0038
100-0038
Cancel
To Next Page
Loading...
