Adjusting the Size, Quality Level, Brightness, and Color Tone
69
3
Taking Pictures
Other Settings
Sharpness, Saturation and Contrast are selected
when the respective button is touched in step 4.
When Auto Bracket for sharpness, saturation or contrast is set, the
shutter opens and closes one time to take one picture, and then the
camera automatically creates the different image data according to the
setting.
This means that three images are created with different qualities when
one picture is shot.
After the pictures are taken, select the picture you like the most of the
three.
Settings from the Capture Toolbar
On the [Capture Toolbar], if you touch [Drive
Mode] and then touch [Auto Bracket], then
the [Change Settings] icon appears on the
bottom right side of the screen.
If you touch this icon you can change the
Auto Bracket settings. The functions that can
be set are the same as those described here.
When "Sharpness" is
selected
Three pictures are taken in order standard, soft and hard.
When "Saturation" is
selected
Three pictures are taken in order standard, moderate and
vibrant.
When "Contrast" is
selected
Three pictures are taken in order standard, low contrast
and high contrast.
38
38
To Next Page
Loading...
Need help?
General
