101
4
Taking Pictures
The procedure for setting the focus manually (\) is described below.
1 Press the four-way controller (5)
in A mode.
2
Use the four-way controller (
5
) to
select
\
and press the
4
button.
The central portion of the image is
magnified to fill the screen of the display
when focusing.
3
Press the four-way controller (
23
).
The \ indicator appears on the display to
indicate the approximate distance to the
subject. Use the four-way controller (23) to
adjust the focus using the indicator as a
guide.
2 : for distant focus
3 : for closer focus
4
Press the
4
button.
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed one minute after you remove
your finger from the four-way controller (5).
After the focus is fixed, you can press the four-way controller (5) again
to display the \ bar and readjust the focus.
•In 9 (Green) mode, you can only select =, q or 3.
• is unavailable in (Digital Wide) mode.
• The noise from focusing is recorded when a focus mode other than
3 or s is selected in C and modes.
• When = is selected and the focus limiter is set to P (Off) (p.116),
if the subject is closer than 50 cm, the camera automatically focuses
from 10 cm (Auto-Macro function).
• When shooting with q selected, if the subject is further than 60 cm
away, the camera automatically focuses to infinity.
Saving the Focus Mode 1p.128
Manual Focus
To switch from \ to another focus mode, press the four-way
controller (5) while the \ bar is displayed.
Capture mode and drive mode cannot be changed while the \ bar
is displayed.
OK
OK
OK
Cancel
Cancel
MENU
Focus Mode
Manual Focus
Focus Mode
Manual Focus
2m
2m
0.5
0.5
1
1
MENU
OK
OK
OK
\ indicator
To Next Page
Loading...
