Pentax Optio W60 - Changing the USB Connection Mode

201
8
Settings
Choose the appropriate USB connection mode depending on whether
you are going to connect the USB cable to a computer or a PictBridge-
compatible printer.
1 Use the four-way controller (23) to select [USB
Connection] on the [W Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select [PC] or [PictBridge].
[PC] : Select this option when
transferring image data to a
computer
[PictBridge] : Select this option when
connecting the camera to a
PictBridge-compatible printer
4 Press the 4 button.
The USB Connection setting is saved.
Changing the USB Connection Mode
Refer to the PC Connection Manual for instructions on connecting
the camera to a computer.
Do not connect the camera to your computer while [PictBridge] is
selected for the USB Connection mode. And do not connect the
camera to your printer while [PC] is selected.
Setting
Format
Sound
07/07/2008
Date Adjust
Alarm
World Time
MENU
Exit
Exit
Exit
1/3
English
Four-way controller
4 button
3 button
MENU
How to display the [W Setting] menu
Setting
Brightness Level
Power Saving
5sec
Folder Name
USB Connection
Video Out
2/3
MENU
Cancel
Cancel
Cancel
OK
OK
OK
OK
Date
PC
PictBridge
3min
Auto Power Off