69
4
Taking Pictures
This camera has been proven to comply with JIS waterproof grade 8 and
can be used to take pictures at a depth of 4 m continuously for 2 hours.
In addition, this camera complies with JIS dustproof grade 5 (IP58).
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select
(Underwater) or (Underwater Movie).
3 Press the 4 button.
The shooting mode is selected and the camera returns to capture
status.
4 Press the shutter release button halfway.
The focus frame on the display turns green if the subject is in focus.
5 Press the shutter release button fully.
If you selected , the picture is taken.
If you selected , recording starts. To stop recording, press the
shutter release button fully. Perform the same steps as C to record
movies.
Taking Underwater Pictures (Underwater Mode/
Underwater Movie Mode)
Use the Underwater mode to take underwater still pictures that capture the
blueness of the sea.
Use the Underwater Movie mode to record movies underwater.
Recording a Movie 1p.130
Shutter release button
Four-way controller
4 button
To Next Page
Loading...
Need help?
General
