202
8
Settings
When you connect the camera to AV equipment, choose the appropriate
video output format (NTSC or PAL) for taking and playing back images.
1 Use the four-way controller (23) to select [Video Out]
on the [W Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select [NTSC] or [PAL].
Choose the video output format to match
the output format of the AV equipment.
4 Press the 4 button.
The Video Out setting is saved.
Changing the Video Output Format
Depending on the country or region, images and sound files may fail
to be played back if the video output format is set different from the
one in use there. If this happens, change the video output format
setting.
Connecting the Camera to AV Equipment 1p.154
Setting
Format
Sound
07/07/2008
Date Adjust
Alarm
World Time
MENU
Exit
Exit
1/3
English
Four-way controller
4 button
3 button
MENU
How to display the [W Setting] menu
Setting
Brightness Level
Power Saving
3min
5sec
Folder Name
USB Connection
Video Out
2/3
MENU
Cancel
Cancel
OK
OK
OK
Date
PC
NTSC
PAL
Auto Power Off
To Next Page
Loading...
