Pentax Optio W60 - Setting the Functions (Program Mode)

65
4
Taking Pictures
In R (Program) mode, the shutter speed and the aperture are set
automatically by the camera during shooting. However, you can select
other functions such as the flash mode and recorded pixels.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller (2345) to select R
(Program).
3 Press the 4 button.
4 Set the functions you want to use.
Refer to “Setting the Shooting Functions”
(p.100 - p.127) for details of how to set the
functions.
5 Press the shutter release button
halfway.
The focus frame on the display turns green
if the subject is in focus.
6 Press the shutter release button fully.
The picture is taken.
Setting The Functions (Program Mode)
Taking Still Pictures 1p.43
Shutter release button
Four-way controller
4 button
38
3 8
38
07/07/2008
0 7/07/ 2 0 0 8
07/07/2008
14:25
1 4:25
14:25