204
8
Settings
You can save battery power by setting the display to dim automatically
when no operation is performed for a fixed time. After the power saving
function has been activated, the display returns to the ordinary
brightness by pressing any of the buttons.
1 Use the four-way controller (23) to select [Power
Saving] on the [W Setting] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23)
to select [2min], [1min], [30sec],
[15sec], [5sec] or [Off].
4 Press the 4 button.
The Power Saving setting is saved.
Using the Power Saving Function
• Power Saving does not function in the following situations:
• while taking pictures in Continuous Shooting mode
• in Playback mode
• while the camera is connected to a computer or printer
• when using the AC adapter
• while recording a movie
• while the menu is being displayed
• When no operation is performed after the camera is turned on,
Power Saving is activated only after 15 seconds elapse even if
[5sec] is selected.
Setting
Format
Sound
07/07/2008
Date Adjust
Alarm
World Time
MENU
Exit
Exit
1/3
English
Four-way controller
4 button
3 button
MENU
How to display the [W Setting] menu
Setting
Brightness Level
Power Saving
Folder Name
USB Connection
Video Out
2/3
MENU
Cancel
Cancel
OK
OK
2min
Off
5sec
30sec
1min
15sec
Auto Power Off
To Next Page
Loading...
