Pentax Optio W60 - Printing Using the DPOF Settings; Disconnecting the Cable from the Printer

184
6
Editing and Printing Images
1 In the printing mode selection screen, use the four-way
controller
( 23 ) to select [DPOF AUTOPRINT].
2 Press the 4 button.
The DPOF settings you have made appear.
Use the four-way controller (45) to check
the number of copies for each picture,
whether to insert the date or not, and the
total number of copies. Refer to p.177 for
instructions on how to make the DPOF
settings.
3 Press the 4 button.
A confirmation dialog appears.
Refer to Steps 7 to 13 of “Printing Single Images” (p.181 and p.182) for
details of changing print settings.
4 Press the 4 button.
The images are printed according to the settings.
Press the 3 button to cancel printing.
Disconnect the USB cable from the camera and printer when you have
finished printing.
1 Turn off the camera.
2 Disconnect the USB cable from the camera and printer.
Printing Using the DPOF Settings
If the picture already has the date imprinted on it (p.127), do not set
Date O (On) in DPOF settings. Otherwise, the date could be
imprinted twice on your printed picture.
Disconnecting the Cable from the Printer
01
OK
10
100
1 00
-
0017
0 017
100
-
0017
MENU
Cancel
Cancel
Cancel
Copies
Date
Date
Date
Date
Print
Print
Print
Total
Print with DPOF se
se
ttingPrint with DPOF setting