Pentax Optio W60 - Setting the Green Button

121
4
Taking Pictures
You can assign one of the following functions to the Green button;
[Green Mode] (p.66) and [Fn Setting] (p.122). You can activate the
assigned function by just pressing the Green button.
1 Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2 Press the four-way controller
(23) to select [Green Button].
3 Press the four-way controller (5).
The Green button setting screen appears.
4 Use the four-way controller (23)
to select the function you want to
register.
5 Press the 4 button.
The Green Button setting is saved.
6 Press the 3 button.
The camera returns to capture status with the current setting.
Setting the Green Button
Assigning a Function (Green Mode)
Green Mode is registered as the default setting.
MENU
3 button
Four-way controller
4 button
Shutter release button
MENU
1/3
10 M
AWB
AUTO
800
Rec.Mode
Recorded Pixels
Quality Level
White Balance
AF Setting
AE Metering
Sensitivity
Exit
MENU
3/3
Exit
Rec.Mode
Memory
Green Button
Sharpness
Saturation
Contrast
Date Imprint
Off
Green Button
MENU
Cancel
OK
OK
Green Mode
Fn Setting