108
3
Taking Pictures
In this mode, a set number of pictures can be taken automatically at a
set interval from a set time.
1
Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2
Use the four-way controller
(45) to select k (Interval
Shoot) and press the
4
button.
The current interval shoot settings
appear for approximately 1 minute. To
take pictures with the current settings,
go to step 10.
3
Press the 4 button while the settings are displayed.
The [Interval Shoot] setting screen appears. [Interval] is marked with
the frame.
4
Set the interval.
1
Press the four-way controller
(5).
2 Use the four-way controller (23)
to set the minutes, then press the
four-way controller (5).
3 Use the four-way controller (23)
to set the seconds, then press the four-way controller (5).
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
Taking Pictures at a Set Interval (Interval Shoot)
Interval 10 sec. – 99 min.
Set the camera to take pictures at intervals. The
intervals can be set in increments of one second from
ten seconds to 4 minutes, or in 1 minute increments
from 4 to 99 minutes. You cannot set the camera to
take interval shots at less than ten seconds.
Number
of Shots
2 shots – number of
recordable images
You can set this to up to 1000 shots. However, it
cannot exceed the number of recordable images.
Start Delay 0 min. – 24 hours
You can set 1 minute increments for the first 59
minutes and 1 hour increments from there. If the
start time is set to 0 minutes, the first picture is taken
as soon as the shutter release button is pressed.
MENU