49
1
Getting Started
Turning the Camera On and Off
1
Press the power switch.
The camera turns on and both the power lamp and display turn on.
If the [Language/ ] screen or [Date Adjustment] screen appears
when you turn the camera on, follow the procedure on p.51 to set the
display language and/or current date and time.
2
Press the power switch again.
The camera turns off and both the power lamp and display turn off.
The SD Memory Card is checked when
the camera turns on and the memory
status is displayed.
Taking Still Pictures 1p.74
Checking the SD Memory Card
a
The SD Memory Card is inserted. Images
and sound files will be saved on the SD
Memory Card.
+
The SD Memory Card is not inserted.
Images and sound files will be saved in the
built-in memory.
r
The write-protect switch on the SD Memory
Card is in the LOCK position (p.47). Images
and sounds cannot be recorded.
Power switch/Power lamp
38
Memory status
OptioWG1_eng.book Page 49 Friday, March 11, 2011 4:10 PM
To Next Page
Loading...
