254
7
Settings
You can choose the start-up screen displayed when the camera is turned on.
You can choose any of the following images as the start-up screen:
• The Guide Display Start-up Screen showing a guide to the shooting
modes and buttons
• One of the 3 pre-installed screens
• One of your own images (compatible images only)
1
In Q mode, press the four-way controller (3).
The Playback Mode Palette appears.
2
Use the four-way controller
(2345) to select ^ (Start-
up Screen).
3
Press the 4 button.
The image selection screen appears.
4
Use the four-way controller
(45) to choose the image for
the start-up screen.
Only images suitable for the start-up
screen are displayed. You can also
choose one of the 3 pre-installed
screens or the Guide Display Start-up
Screen already stored in the camera.
5
Press the 4 button.
The setting is saved.
Changing the Start-up Screen
2/2
Start-up Screen
For setting a captured
image as the Start-up
Screen
OK
OK
MENU
Cancel
100
To Next Page
Loading...
