204
5
Editing and Printing Images
This function lets you add a decorative frame to still pictures. There are
6 frames already stored in the camera, 3 for each aspect ratio (4:3 and
16:9). You can copy the optional frames from the CD-ROM (S-SW117)
supplied with the camera.
1
Enter the Q mode and use the four-way controller
(45) to choose the image to which you want to add a
frame.
2
Press the four-way controller (3).
The Playback Mode Palette appears.
3
Use the four-way controller
(2345) to select N (Frame
Composite).
4
Press the 4 button.
The 12-frame display of the frame selection screen appears.
5
Use the four-way controller
(2345) to choose a frame.
Adding a Frame (Frame Composite)
The frame composite function cannot be used on the following images.
• Movies or images taken with F (Digital Panorama) or (Report)
modes
• Images that have recorded pixels of l, or m
An error message appears in step 4.
1/2
OK
OK
MENU
Cancel
Frame Composite
For composing an image
with a frame. Select Over-
write or Save as to save
OK
To Next Page
Loading...
