281
8
Connecting to a Computer
• When you use a new Eye-Fi card, copy the install file of Eye-Fi
Manager stored on the card to your computer before you format the
card.
• Set [Eye-Fi] to @(Off) or do not use an Eye-Fi card in a location where
wireless LAN devices are restricted or prohibited, such as on planes
(since images are transferred via wireless LAN).
• If you insert an older version Eye-Fi card in the camera, an error
message appears.
• Images are not transferred in the following cases:
- When available wireless LAN access points are not found.
- When the battery level is low ( (yellow) or (red) is indicated).
• Voice recording sound files cannot be transferred.
• We recommend that you use an AC adapter (optional) when you
transfer a large number of images because this often requires long
transferring times.
• While images are being transferred, the Auto Power Off does not
function.
• If you transfer large-sized files, such as a movie, the temperature
inside the camera increases and the camera may be automatically
turned off to protect the circuit.
• To transfer images via wireless LAN, use of an access point, an
Internet environment, and configuration are required. For details, refer
to the Internet website (http://www.eye.fi).
• For details on how to use an Eye-Fi card, refer to the operating manual
supplied with the Eye-Fi card.
• If you have a problem with the Eye-Fi card, contact the manufacturer
of the card.
• The camera is equipped with a function that sets Eye-Fi
communication on or off, however, this does not guarantee availability
of all the functions on the Eye-Fi card.
• Use of the Eye-Fi card is permitted only in the country where you
purchased the card. Follow the laws of that country.
OptioWG1_eng.book Page 281 Friday, March 11, 2011 4:10 PM
To Next Page
Loading...
Need help?
General
Weight and Dimensions
