Pentax Optio WG-1 - Page 307

307
9
Appendix
2 Use the four-way controller (23) to select [GPS].
3 Press the four-way controller (5).
[GPS] screen appears.
4 Use the four-way controller (23)
to select [Logging].
5 Press the four-way controller (5).
A pull-down menu appears.
6 Use the four-way controller (23)
to select the interval for
positioning.
Choose from [Off], [15sec.], [30sec.], or
[1min.]
7 Press the 4 button.
The setting is saved.
• [Logging] can be set only when [GPS Setting] is set to O (On).
• The logs are saved in the SD Memory Card only.
• Up to 999 log files can be saved or to the capacity of the SD Memory
Card.
• A new log file is created in the following situations:
• When the date changes
• When the capacity of a log file is full
• After changing an SD Memory Card
• When changing the display format of the date
• When the battery level icon is red, logging stops.
• When setting the interval in [Logging], the camera performs
positioning regularly even if it is turned off, which reduces the battery
life.
• Before changing the battery, set [Logging] to [Off].
MENU
Logging
GPS Setting
GPS
Auto Time Synch.
Off
Off
Logging
GPS Setting
GPS
Auto Time Synch.
15sec.
Off
30sec.
1min.
OK
OK
MENU
Cancel
This part applies only to Optio WG-1 GPS camera
OptioWG1_eng.book Page 307 Friday, March 11, 2011 4:10 PM