6
75
Appendix
tMemo
• In rare cases, the camera may not operate correctly due to
static electricity. This can be remedied by taking the battery
out and putting it back in again. If the camera operates
correctly, it does not require any repairs.
Troubleshooting
Problem Cause Remedy
The camera does
not turn on.
Battery is not
installed properly.
Check the orientation of battery.
The battery power
is low.
Charge the battery.
The shutter cannot
be released.
The built-in flash is
charging.
Wait until charging is finished.
There is no
available space on
the memory card.
Insert a memory card with
available space or delete
unwanted images.
Data being
processed.
Wait until processing is
finished.
Autofocus does
not work.
The subject is
difficult to focus
on.
v cannot work well for low-
contrast objects (the sky, white
walls, etc.), dark colors,
intricate designs, rapidly-
moving objects or scenery shot
through a window or a net-like
pattern.
Lock focus on another object
located at the same distance as
your subject, then aim at the
target and take a picture.
Alternatively, use w. (p.37)
The subject is too
close.
Move away from the subject
and take a picture.
The focus cannot
be locked.
[Autofocus
Method] is set to
f.
Set [Autofocus Method] to e,
g, h or i. (p.36)
The capture mode
is set to e, l, o
or u of S
mode.
[Autofocus Method] is fixed to
f in these modes. Set a
capture mode other than those
shown to the left.
The built-in flash
does not
discharge.
When the flash
mode is set to A
or B, the flash
will not discharge
if the subject is
bright.
Change the flash mode. (p.34)
The capture mode
is set to c, g,
j, k, r, o,
s, t, u or v
of S mode.
The flash mode is fixed to J in
these modes. Set a capture
mode other than those shown
to the left.
The camera is not
recognized when it
is connected to a
computer.
The USB
connection mode
is set to [PTP].
Set [USB Connection] to [MSC]
in [Interface Options] of the D2
menu.
The shooting
settings cannot be
changed.
The quick dial is
set to the position
1 to 4.
When you use the quick dial to
take pictures, priority is given to
the settings saved in the quick
dial.
Problem Cause Remedy
To Next Page
Loading...
Need help?
General
Weight and Dimensions
