3
Shooting
32
tMemo
• Exposure Bracketing shooting enables you to take pictures
while automatically changing exposure. (p.41)
• A proper exposure may not be obtained with the selected
shutter speed and aperture value when the sensitivity is set
to the fixed value.
•In L mode, the difference from the proper exposure is
displayed in the EV bar scale while the shutter speed or
aperture value is adjusted.
• You can set the function of the M button for when the camera
is in L/K mode. Set in [Green Button] of the A3 menu.
(p.63)
• Sensitivity values higher than ISO 1600 are not available
when the shutter speed is set to 2 seconds or slower in I/
L mode.
1 Set the mode dial to L.
2 Turn V to the left.
V appears after the slowest
shutter speed.
3 Press the shutter release button.
The shutter remains open as long as the shutter release
button is kept pressed (up to 30 seconds).
4 Take your finger off the shutter release button.
Exposure ends.
uCaution
• Bulb shooting is available only when using a lens that has a
lens shutter. (p.72)
• Some functions cannot be used in this mode. (p.69)
1 Set the mode dial to C.
Use V and J to adjust the
exposure compensation value
when [Exposure Setting] of the
C1 menu is set to o.
2 Press the shutter release button halfway.
3 Press the shutter release button fully.
Movie recording starts.
R blinks at the top left of the screen.
When [Focus Method] is set to v, press E to perform
autofocus.
4 Press the shutter release button fully.
Movie recording stops.
Bulb Shooting
Checking the Depth of Field (Preview)
When [Preview] is assigned to M in [Green Button] of the
A2 menu, you can check the depth of field before taking
pictures. (p.62)
Movie Mode
10'30"
To Next Page
Loading...
