Pentax Q7 - Removing the Red-Eye Effect; Processes Images with Digital Filters

4
Playback
57
You can correct images where the flash has caused the subject
to appear with red eyes.
1 Display the image to edit in single image
display.
2 Select U in the playback mode palette.
[The operation could not be completed correctly] appears
when red eyes cannot be detected on the camera.
3 Select [Save as] and press E.
uCaution
• The Red-eye Edit function can be used only for the JPEG
images captured with this camera.
1 Display the image to edit in single image
display.
2 Select T in the playback mode palette.
The screen to select a filter appears.
3 Use ABCD to select a
filter.
Use V to select a different
image.
Proceed to Step 6 if you do not need to change the parameters.
4 Press J.
The parameter setting screen appears.
5 Use AB to select a
parameter, and use CD to
adjust the value.
The parameters that can be set
varies depending on the selected
filter.
6 Press E.
The save confirmation screen appears.
7 Select [Apply additional filter(s)] or [Save as]
and press E.
Select [Apply additional filter(s)] when you want to apply
additional filters to the same image. The screen of Step 3
reappears.
uCaution
• Only JPEG and RAW images captured with this camera can
be edited with the digital filters.
Removing the Red-eye Effect
Processes images with Digital Filters
Base P aramet er A dj
Base Parameter Adj
Stop
Stop
OK
OK
OK
Parame ter Adj.
Parameter Adj.
MENU
100-0001
100-0001
100-0001
Base Parameter Adj
Toy Camera
High Contrast
Shading
Tone Expansion
Invert Color
Extract Color
Unicolor Bold
Water Color
Posterization
Slim
Fish-eye
Retro
Sketch
Miniature
Soft
Starburst
Bright ness
Brightness
Cancel
Cancel
OK
OK
OK
MENU