3
Shooting
37
You can set the position and range of the autofocusing area (AF
area).
1 Set [Autofocus Method] to g or h.
2 Press F.
The camera is in standby mode.
3 Press E.
4 Select the AF area.
Available operations
5 Press E.
The AF area is set.
1 Set [Focus Method] to w.
2 Press F.
The camera is in standby mode.
3 While viewing the monitor,
turn the focus ring.
The shutter is released by
pressing the shutter release
button fully even if the subject is
not in focus.
The image in the center of the monitor is automatically
magnified when the focus ring is turned.
1 Select [MF Autozoom] in [AF/MF Settings] of A1
menu.
2 Select the magnification level and press E.
3 Press F twice.
The camera is in standby mode.
Selecting the Desired Focusing Area
ABCD Changes the position of the AF area.
V When g is selected: increases/reduces
the size of the AF area.
M Returns the AF area to the center.
OK
OK
Adjusting the Focus Manually
(Manual Focus)
Focusing with the Image Magnified A1
To Next Page
Loading...
