Pentax Q7 - How to Change Function Settings; Using the Direct Keys; Using the Control Panel

1
Introduction
13
The camera functions and their settings can be selected and
changed by using the following ways.
You can set frequently used shooting functions. Press G in
standby mode.
How to Change Function Settings
Direct keys Press ABCD in standby mode.
Control panel
Press G in standby mode.
(indicated with the v mark in this manual)
Menus Press F.
Using the Direct Keys
WXYZ
A Sensitivity p.33
B White Balance p.43
C Flash Mode p.34
D Drive Mode p.38
Using the Control Panel
G
99999
99999
99999
99999
OK
MENU
Aspect Ratio
Aspect Ratio
Cancel
Cancel
Aspect Ratio
Aspect Ratio
OK
OK
Use ABCD to select an item.
Use V to change settings.
Press F to cancel
setting operation.
Press E to confirm the
selected item and return to
the control panel.
E